MENU     Set Up     Reading The Blink Code     Redefining A Device Button
Clearing Out A Device Button     Punch Through     Advanced Codes

How to Program your One For All® remote

(Model URC - 4000)

Three Color LED
The three color LED will flash green, red, or yellow during operation of the remote.
It flashes green when it sends a command. It also flashes green to confirm when a new device is locked in.
It flashes red during set up
It flashes yellow when the remote cannot find your device.


Set Up

After getting the proper codes from your manual or Customer Service, use the following instructions to enter them into your remote.
  1. Press the device you want to program, then release.
  2. Press A or "Magic", then B, then C.
  3. Enter your 3 digit code.
  4. You should receive 2 quick green flashes after entering your code.


Reading The Blink Code

Press A or "Magic"- device (i.e. TV,VCR,etc),
Then press 1 and count the blinks on the remote (1st digit),
Press 2 and count the blinks (2nd digit).
Press 3 and count the blinks (3rd digit).
These three numbers make up your setup code.


Redefining A Device Button

The remote allows the user to assign a TV to the VCR or CABLE button.
You can assign any combination of devices to different buttons.
Press A or "Magic"- B - C - 9 - 9 - 9 - DEVICE 1 - DEVICE 2
Then press:
DEVICE 1 - A or "Magic"- B - C - SET UP CODE
Example: Let's change the Cable button to a TV button.
A or "Magic"- B - C - 9 - 9 - 9 - CABLE - TV
We can then assign a TV to the Cable button.
CABLE - A or "Magic"- B - C - 017


Clearing Out A Device Button

Press A or "Magic"- B - C - 9 - 9 - 9 - DEVICE KEY - DEVICE KEY.
Example: A or "Magic" - B - C - 9 - 9 - 9 - TV - TV


Punch Through

Punch Through allows you to operate functions from one device while using another
one. For instance- if your are using a VCR with out volume- you can get the TV volume without
changing devices keys. Use this procedure to Punch Through a function:
  1. Press the DEVICE button you want the function on.
  2. Press A or "Magic" - B - C - 9 - 9 - 9 - the DEVICE you want -the Function you want .
  3. The green light will blink twice.
(i.e. To get the volume from the TV in the CABLE mode: TV - A or "Magic" - B - C - 9 - 9 - 9 - CABLE - VOLUME+)


Advanced Codes

Many devices have a myriad of remote functions. You can access many of these functions on this remote by using the procedure below:
  1. Look in your manual for the page with the set up code for your device.
    You will see the advanced functions for your device listed there with special two digit codes.
  2. Press the DEVICE key for the device you want to access.
  3. Press A or "Magic" - and then the two digit code for your function.
  4. The function will be performed on the device.


All Material Copyright Universal Electronics Inc.
"One For All" copyright Universal Electronics Inc.
Any questions about the products should be directed to