How to Program your One For All® remote
( URC-4600/4700 )
Set Up
After getting the proper codes from your manual, use the following instructions to enter them into your remote.
- Press the device you want to program, then release.
- Press and hold the SETUP button until the red LED flashes twice, then release.
- Enter your 4 digit code.
- You should receive 2 quick flashes after entering your code.
menu
Blinking Back the Code:
- Tap the device Key - Release
- Hold "SETUP" until it blinks twice - release.
- Press 9 - 9 - 0.
- Press 1, Count the number of blinks. (1st digit)
- Press 2, Count the number of blinks. (2nd digit)
- Press 3, Count the number of blinks. (3rd digit)
- Press 4, Count the number of blinks. (4th digit)
If the remote DOES NOT blink it means the number is 0.
menu
Redefining a Key
- Hold "SETUP" Until it blinks twice.
- press 9 - 9 - 2.
- press the DEVICE key you want moved
- press the DEVICE key you want to replace.
Example: If you want the Aux key to be a TV key:
"SETUP" (2 blinks) 9 - 9 - 2, TV (you want to move TV)
Then AUX (you want to replace AUX).
menu
Punch Through
This sets Volume to work for one device in all modes.
For example, the TV volume will work in the cable and VCR modes.
- Hold "SETUP" until it blinks twice - release.
- Press 9 - 9 - 3.
- Press the device key you would like the volume to come from.
You will get two blinks on the remote.
menu
Volume Default
Use this to get Cable or VCR volume to work.
- Hold SETUP until it blinks twice - release.
- Press 9 - 9 - 3
- press the VOLUME key, you will get two blinks.
Now The volume is set for all original devices.
menu
Clearing Out
A Device Key - Or Another Button
- Tap the device Key - release.
- Hold SETUP for Two blinks - release.
- Press 9 - 9 - 2
- Press the button twice. - Two blinks.
All Key movers, and Defaults
- Tap the device Key - release
- Hold "SETUP" for two blinks - release
- Press 9 - 8 - 0 -- Two blinks.
menu
|
