MENU  •   Set Up  •   Reading The Blink Code  •   Redefining A Device Button
Clearing Out A Device Button  •   Advanced Functions & Key Mover  •   Punch Through

How to Program your One For All® remote

(Models URC-2086)


Set Up

After getting the proper codes from your manual or Customer Service, use the following instructions to enter them into your remote.
  1. Press the device you want to program, then release.
  2. Press A, then B, then C.
  3. Enter your 3 digit code.
  4. You should receive 2 quick flashes after entering your code.

menu

Reading The Blink Code

Press A - device (i.e. TV,VCR,etc),
Then press 1 and count the blinks on the remote (1st digit),
Press 2 and count the blinks (2nd digit).
Press 3 and count the blinks (3rd digit).
NO BLINKS = 0
These three numbers make up your setup code.

menu

Redefining A Device Button


The remote allows the user to assign a TV to the VCR or CABLE button.
You can assign any combination of devices to different buttons.
Press A - B - C - 9 - 9 - 9 - DEVICE 1 - DEVICE 2
Then press:
DEVICE 1 - A - B - C - SET UP CODE
Example: Let's change the Cable button to a TV button.
A - B - C - 9 - 9 - 9 - CABLE - TV
We can then assign a TV to the Cable button.
CABLE - A - B - C - 017

menu

Clearing Out A Device Button


Press A - B - C - 9 - 9 - 9 - DEVICE KEY - DEVICE KEY.
Example: A - B - C - 9 - 9 - 9 - TV - TV

menu

Advanced Functions & Key Mover

Many devices have advanced functions. In order to duplicate those functions you need to find the correct code to send that function to your device. When you have found the code, you can access the function either directly or through Key Mover.

Direct Access

Press the DEVICE button
Press the A button
Press the three digit code for the function
The function will operate on your device.
Example: TV - A - 652 is "enter" on a Sony TV.

Key Mover

Key Mover allows you to put an advanced function on a key so you just have to hit that key to access the function. Press A - B - C - 9 - 9 - 9
Press the key you want the function on.
Press A - three digit function code.
Example: TV - A - B - C - 9 - 9 - 9 - PLAY - A - 652.
This would put the "enter" function for that Sony TV on the PLAY button.
You should NOT put advanced functions on the DEVICE keys(i.e. TV,VCR,CABLE,etc.)
You can clear a function off a key by pressing:
A - B - C - 9 - 9 - 9 - KEY - KEY.

menu

Punch Through

Punch Through allows you to operate functions from one device while using another
one. For instance- if your are using a VCR with out volume- you can get the TV volume without
changing devices keys. Use this procedure to Punch Through a function:
  1. Press the DEVICE button you want the function on.
  2. Press A - B - C - 9 - 9 - 9 - the DEVICE you want -the Function you want .
  3. The green light will blink twice.
(i.e. To get the volume from the TV in the CABLE mode: TV - A - B - C - 9 - 9 - 9 - CABLE - VOLUME+)

menu


All Material Copyright ® Universal Electronics Inc.
"One For All" copyright Universal Electronics Inc.
Any questions about the products should be directed to help@ueic.com